single flange buterfly valve-manufacture,factory,supplier from China

(Total 10 Products for single flange buterfly valve)

BELLOW EXPANSION JOINT

Flange standard Customized installation length Customized bellows and bolt materials：304/316/321/310S;- Flange Standards Support Customization;- Installation Length Support Customization;- Material of bellows and bolts304/316/321/310S

Contacter maintenant

ANSI Gate Valve

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards.

Contacter maintenant

Single Sphere Rubber Flexible Expansion Joint

Contacter maintenant

Threaded Ball Valve

Application1.Design and ManufactureANSI B16.12.Face to faceANSI B16.103.Flange End DimensionsBS45044.Working Pressure150PSI Steam Basic Rating5.Pressure TestAPI598Main Parts and MaterialsNumberPart NameMaterial1BodyCF8M/CF82BonnetCF8M/CF83BallSS304/SS3164SeatPTFE/RPTFE5GasketPTFE6StemSS AISI 4107Stem PackingPTFE8Stop CollarCarbon Steel(ASTM A307)9LeverSS304

Contacter maintenant

2-PCS Ball Valve Screwed End

Contacter maintenant

Wafer Type Single Board Check Valve Aluminum

Wafer Type Single Board Check Valve Stainless Steel

Take a look at valve refers to the outlet and ultimate parts of the round disc and through its own weight and media stress generated movement to block the media float again valve. automatic valve magnificence, also referred to as test valve, one-way valve, backflow valve or isolation valve.Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media

Contacter maintenant

WRAS Flange Type Butterfly Valve

Resilient seated butterfly valve is a double flanged design which can be used for dead-end service .This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.SizeDN100-DN1800DN100-DN1800Working pressure16Bar10BarShell24Bar15BarSeal18Bar11BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system &nbs

Contacter maintenant

Flanged Ball Valve Cast Iron Body

Application1.Design and ManufactureANSI B16.12.Face to faceANSI B16.103.Flange End DimensionsBS45044.Working Pressure150PSI Steam Basic Rating5.Pressure TestAPI598Main Parts and MaterialsNumberPart NameMaterial1BodyA126B/A536 65-45-122BonnetA126B/A536 65-45-123BallAISI 410/AISI 3044SeatPTFE/RPTFE5GasketPTFE6StemSS AISI 4107Stem PackingPTFE8Stop CollarCarbon Steel(ASTM A307)9Gland FlangeA126B/A536 65-45-1210LeverA536 65-45-12

Contacter maintenant

Flange Type Butterfly Valve Flanged Type

Flange Type Butterfly Valve Bronze material for sea water

This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.Sizes:DN100-DN1800Pressure Class:PN10 OR PN16Design:API609 BSEN593 BS5155Test: API598 ISO5208 EN12266-1Flange Connection: DIN2501 PN10/16,ISO7005-2 PN10/16, EN1092-2 PN10/16,ANSI B16.5 class 150LB ANSI B16.47 Series A class 150LB,ANSI B16.1 MSS SP44 class150LB WAAW C207Top Flange:ISO5211Face to Face:EN558-1 s

Contacter maintenant

API6D Short Pattern Single Disc Wafer Check Valve

Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media flowing backwards and prevent damaging water hammer,guarantee the safety using of pipes.Features:1. The products are new structure .small and light weight2. Reliable sealed,endurable open-close,erar-resisting,long life.3. With less flowing resistance than old check valve and obviou

Contacter maintenant

Relate News

The development trend of electric butterfly valve

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

Pressure Test Method Of Check Valve

Check valve is a valve that relies on the medium itself to flow and automatically open and close the valve flap, used to prevent the backflow of the medium, also known as check valve, check valve, backflow valve, and back pressure valve.

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.

China Refrigation Equipment Exhibition

The Chinese Refrigation Equipment Exhibition is the most special exhibition in Refrigation field.Our Diefei Brand Check valve and Butterfly valve is an important part of this Exhibition.We have the expertise and experience to produce,also have a big After-service team . We get the high apprecition from our customers.

What Is The Advantage for Butterfly Valve

Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.

Common Check Valve Materials

Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.

Introduction of Butterfly Valve Characteristics

1. Butterfly valve has the characteristics of simple structure, small volume, light weight, low material consumption, small installation size, quick switch, 90 reciprocating rotation and small driving torque, etc. It is used to cut off, connect and adjust the medium in the pipeline, and has good fluid control characteristics and closing and sealing performance.2. Butterfly valves can transport mud, and the liquid accumulated at the pipe mouth is the least. Under low pressure, good sealing can be achieved. Good adjustment performance.3.

Background of Butterfly Valve

Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.

The Difference Between Butterfly Valve With a pin and Without Pin

FIRST:The difference between butterfly valve has a pin and without pin: Price: the without pin butterfly valve is more expensive than the pin ones. Usage: WITHOUT PIN TYPE REDUCE THE RISK OF LEAKAGE.