DF614 Wafer Type Butterfly Valve with two shaft-manufacture,factory,supplier from China

(Total 10 Products for DF614 Wafer Type Butterfly Valve with two shaft)

two shaft butterfly valve,pinless butterfly valve

Two Shaft Wafer Type Butterfly Valve

Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contacter maintenant

WECO Industry Butterfly Valve Two-shaft type

100% bi-directional tight shut-off. Installation without restrction in direction of flow.Reduced weight and overall dimensions.Low pressure loss and reduced energy costs.

Contacter maintenant

DI+EPDM Coated Disc Grooved End Butterfly Valve with handlever

It is easily installed with two grooved end couplings.

Contacter maintenant

Alloy Staliness Steel Grooved End Butterfly Valve

Grooved End Butterfly Valve ductile iron +EPDM seat

Butterfly valve offers economical,efficient,and reliable service for grooved end piping applications.It is easily installed with two grooved end couplings.

Contacter maintenant

Gear operator Wafer Type Butterfly Valve

Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contacter maintenant

Anti-condensation Aluminum Butterfly Valve

The principle of the anti-condensation butterfly valve is due to the corrosion resistance of the aluminum alloy body, which is light in weight and easy to install; the spherical structure around the butterfly plate is helpful to reduce the friction torque with the valve seat; the butterfly plate and the valve shaft are made of stainless steel, which increases The anti-corrosion ability also plays a role in reducing heat conduction and preventing the temperature of the driving device from being too low; the housing of the driving device is made of aluminum alloy, which is light in weight and fa

Contacter maintenant

WECO Industry Butterfly Valve Two-shaft type

100% bi-directional tight shut-off. Installation without restrction in direction of flow.Reduced weight and overall dimensions.Low pressure loss and reduced energy costs.

Contacter maintenant

U Type Butterfly Valve with Ductile iron body

Resilient seated butterfly valve is a double flanged design which may be used for dead-give up carrier .this butterfly valve collection has some of the layout functions and benefits including high cv rankings ,minimum elements exposed to the road media ,greater reliability and a validated report of long provider life .a primary design advantage of this valve product traces is international compatibility.Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system

Contacter maintenant

Pneumatic Butterfly Valve

The pneumatic butterfly valve is composed of a pneumatic actuator and a butterfly valve. The pneumatic butterfly valve is a pneumatic valve that uses a circular butterfly plate that rotates with the valve stem to realize the opening and closing. It is used more and more on medium-bore pipes. Pneumatic butterfly valve classification: stainless steel pneumatic butterfly valve, hard seal pneumatic butterfly valve, soft seal pneumatic butterfly valve, carbon steel pneumatic butterfly valve.

Contacter maintenant

Wafer type Pneumatic Butterfly Valve

Butterfly plate outer circle using spherical form, improve the sealing performance and prolong the service lifestyles of the valve, with stress open and close extra than 50,000 times nonetheless preserve 0 leakage. The sealing components may be changed, and the sealing is dependable to achieve -manner sealing. butterfly plate may be spraying coating in line with user necessities, which include nylon or ptfe. the valve may be designed as flange connection and clamping connection. The using mode can choose guide, electric or pneumatic.Material:Bo

Contacter maintenant

Relate News

Advantages Of Two Shaft Wafer Type Butterfly Valve

Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.

The development trend of electric butterfly valve

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

The Difference Between Butterfly Valve With a pin and Without Pin

FIRST:The difference between butterfly valve has a pin and without pin: Price: the without pin butterfly valve is more expensive than the pin ones. Usage: WITHOUT PIN TYPE REDUCE THE RISK OF LEAKAGE.

Background of Butterfly Valve

Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.

The meaning of butterfly valve and the problems that are easily overlooked in the use process

In production and life, the emergence of valves is that the utilization rate of their valves and accessories is getting higher and higher, such as check valves, check valves, electric butterfly valves, pneumatic butterfly valves, rubber soft joints, electric ball valves, one-way valves, and wafer butterfly valves. , filter, etc., which have brought great convenience to production and life.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.

Introduction of Slient Check Valve Wafer Type

Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve. automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve. disc movement is split into lifting and swing. elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc. the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect). valve

Matters Needing Attention in the Use of Gate Valves

1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden. 2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top). 3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). 4. Gate valve with transmission mechanism shall be installed according to the product instruction manual. 5.

Difference Between Butterfly Valve and Gate Valve

Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.

Introduction of Butterfly Valve Characteristics

1. Butterfly valve has the characteristics of simple structure, small volume, light weight, low material consumption, small installation size, quick switch, 90 reciprocating rotation and small driving torque, etc. It is used to cut off, connect and adjust the medium in the pipeline, and has good fluid control characteristics and closing and sealing performance.2. Butterfly valves can transport mud, and the liquid accumulated at the pipe mouth is the least. Under low pressure, good sealing can be achieved. Good adjustment performance.3.